| Customization: | Available |
|---|---|
| Media: | Oil |
| Driving Mode: | Manual |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The eccentric semi-ball valve is a relatively new type of ball valve. It has some advantages unique to its own structure, such as no friction in the switch, the seal is not easy to wear, and the opening and closing torque is small. This allows the size of the actuator to be used reduced. Equipped with a multi-turn electric actuator, the medium can be adjusted and tightly cut off. It is widely used in petroleum, chemical industry, urban water supply and drainage and other working conditions that require strict cutting.
Eccentric semi-ball valve has cutting function,
1. The eccentric semi-ball valve is composed of main components such as a valve body, an eccentric shaft, a valve cover, a ball crown, a sleeve, and a valve
seat
. process, there is no need to disassemble it from the pipeline. You only need to remove the bolts on the valve cover and remove the valve cover, so that the eccentric shaft can be taken out. This ensures that the valve can be online repair.
4. The eccentric semi-ball valve should have sufficient strength.
The eccentric semi-ball valve should have strength. The eccentric crankshaft adopts a fixed ball structure without any vibration at high flow rates. The shell test is performed in accordance with the national standard GB13927-1992
.
The eccentric semi-ball valve has a cutting function, which can cut off debris (branches, textile bags, etc.) in the medium when closing to ensure the normal opening and closing of the valve.
1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length.
2. It has simple structure, small size and light weight.
3. The eccentric semi-ball valve has a top-mounted structure. Valves installed on pipelines can be directly inspected and repaired online, which can effectively reduce device shutdowns and reduce costs.
4. The eccentric semi-ball valve is a single seat valve design. It eliminates the problem of abnormal pressure increase of the medium in the valve cavity that affects the safety of use.
5. Low torque design. The specially designed valve stem only needs a small handle to open and close the valve easily.
6. No friction in opening and closing. This function completely solves the problem of traditional [wiki]valve[/wiki] affecting the sealing due to mutual friction between the sealing surfaces.
7. Wedge sealing structure. valve is not affected by changes in pipeline pressure difference, and the sealing performance is reliably guaranteed under various working conditions.
8. Self-cleaning structure of the eccentric semi-ball valve sealing surface.
The valve chain is rotated to open or block the valve. Ball valves are easy to switch, small in size, can be made into large diameters, have reliable sealing, simple structure, and easy maintenance. The sealing surface and spherical surface are always in a closed state and are not easily eroded by the medium. They are widely used in various industries.
The eccentric semi-ball valve is composed of the valve body, eccentric shaft, valve cover, semi-ball, bushings, valve seat, and other parts, it rotates the eccentric shaft by 90 ° to open/close the valve to cut off the medium, suitable for sewage disposal, petroleum, chemical, electricity and paper industries processing of slurry, slurry ash, paper pulp, alumina and other sealing tightness occasions, especially in two-phase flow medium. According to its installation structure, the eccentric semi-ball valve can be divided into a top entry eccentric semi-ball valve and a side entry eccentric semi-ball valve.
The design of the eccentric ensures no friction between the valve seat and semi-ball during opening or closing, extending the valve serving life. There is a certain eccentricity between the rotation of the eccentric axis and the center of the valve body, that is, the half-ball changes the axial displacement with the change of angular displacement when it is opened and closed so that they are in a linear proportional relationship, and its motion path is a semi-parabolic trajectory. The trajectory of the hemispheric body from the lowest point to the highest point automatically wedges the seat, and the seat also automatically generates a preload depending on the elastic modulus of the material to close tightly.
The semicircular port has good flow performance and linear regulation performance, and impurities will not be deposited in the valve body cavity. In addition, she has the function of cutting, that is, in the closing of the media can be cut off debris, to ensure the normal opening and closing of the valve. can be surfacing with different alloys. to meet the needs of different occasions.
Design and manufacture: MSS SP-108
Size: DN2″-40″
PN: CLASS150-CLASS900
Materials
| Part | Material |
| Valve body | WCB,A105 |
| Shaft | 420,410 |
| Disc | Nitriding steel, wear-resistant steel |
| Seat | Nitriding steel, wear-resistant steel |
| Bearing | Aluminum - bronze |
| Packing | PTFE,Flexible graphite |
Size
| PN(MPa) | DN(mm) | Size (mm) | |||||||||||
| d1 | L | D | D1 | D2 | D6 | f | f2 | b | Z-φd | H1 | H2 | ||
| 1.6 | 25 | 25 | 150 | 115 | 85 | 65 | - | 2 | - | 14 | 44 | - | 75 |
| 32 | 32 | 165 | 135 | 100 | 78 | - | 2 | - | 16 | 48 | - | 105 | |
| 40 | 40 | 180 | 145 | 110 | 85 | - | 3 | - | 16 | 48 | - | 95 | |
| 50 | 50 | 200 | 160 | 125 | 100 | - | 3 | - | 16 | 48 | - | 107 | |
| 65 | 65 | 220 | 180 | 145 | 120 | - | 3 | - | 18 | 48 | - | 142 | |
| 80 | 80 | 250 | 195 | 160 | 135 | - | 3 | - | 20 | 88 | - | 152 | |
| 100 | 100 | 280 | 215 | 180 | 155 | - | 3 | - | 20 | 88 | - | 178 | |
| 125 | 125 | 320 | 245 | 210 | 185 | - | 3 | - | twenty two | 88 | - | 252 | |
| 150 | 150 | 360 | 280 | 240 | 210 | - | 3 | - | twenty four | 8-23 | - | 272 | |
| 200 | 200 | 400 | 335 | 295 | 265 | - | 3 | - | 26 | 12-23 | - | 342 | |
| 2.5 | 25 | 25 | 150 | 115 | 85 | 65 | - | 2 | - | 16 | 44 | - | 75 |
| 32 | 32 | 165 | 135 | 100 | 78 | - | 2 | - | 18 | 48 | - | 85 | |
| 40 | 40 | 180 | 145 | 110 | 85 | - | 3 | - | 18 | 48 | - | 95 | |
| 50 | 50 | 200 | 160 | 125 | 100 | - | 3 | - | 20 | 48 | - | 107 | |
| 65 | 65 | 220 | 180 | 145 | 120 | - | 3 | - | twenty two | 88 | - | 142 | |
| 80 | 80 | 250 | 195 | 160 | 135 | - | 3 | - | twenty four | 88 | - | 152 | |
| 100 | 100 | 280 | 230 | 190 | 160 | - | 3 | - | 28 | 8-23 | - | 178 | |
| 125 | 125 | 320 | 270 | 220 | 188 | - | 3 | - | 30 | 8-25 | - | 252 | |
| 150 | 150 | 360 | 300 | 250 | 218 | - | 3 | - | 34 | 8-25 | - | 272 | |
| 200 | 200 | 400 | 360 | 310 | 278 | - | 3 | - | 34 | 12-25 | - | 342 | |
| 4.0 | 25 | 25 | 150 | 115 | 85 | 65 | 58 | 2 | 4 | 16 | 44 | - | 75 |
| 32 | 32 | 180 | 135 | 100 | 78 | 66 | 2 | 4 | 18 | 48 | - | 107 | |
| 40 | 40 | 200 | 145 | 110 | 85 | 76 | 3 | 4 | 18 | 48 | - | 95 | |
| 50 | 50 | 220 | 160 | 125 | 100 | 88 | 3 | 4 | 20 | 48 | - | 107 | |
| 65 | 65 | 250 | 180 | 145 | 120 | 110 | 3 | 4 | twenty two | 88 | - | 142 | |
| 80 | 80 | 280 | 195 | 160 | 135 | 121 | 3 | 4 | twenty two | 88 | - | 152 | |
| 100 | 100 | 320 | 230 | 190 | 160 | 150 | 3 | 4.5 | twenty four | 8-23 | - | 178 | |
| 125 | 125 | 400 | 270 | 220 | 188 | 176 | 3 | 4.5 | 28 | 8-25 | - | 252 | |
| 150 | 150 | 400 | 300 | 250 | 218 | 204 | 3 | 4.5 | 30 | 8-25 | - | 272 | |
| 200 | 200 | 502 | 375 | 320 | 282 | 260 | 3 | 4.5 | 38 | 12-30 | - | 342 | |
Specifications
| PN(Mpa) | 0.6 | 1.0 | 1.6 | 2.5 | 4.0 |
| DN(mm) | 40-600 | 40-600 | 40-600 | 40-600 | 40-600 |
| Sealing test pressure(Mpa) | 0.66 | 1.1 | 1.76 | 2.75 | 4.4 |
| Body test pressure(Mpa) | 0.9 | 1.5 | 2.4 | 3.75 | 6.0 |
| Working temperature(°C) | -29~300, -29~425, -29~540 | ||||
| Medium | Liquids like seawater, sewage, acid and alkali or slurry, steam, gas, oil, mud, ash etc. | ||||
| Operation | Handwheel, electric, pneumatic | ||||
| Connection | Flanged, wafer | ||||
| Installation | Vertical and horizontal | ||||
){kind=link}